Model of The Physical Protection System Design For Nuclear Facilities In Indonesia

MODEL OF THE PHYSICAL PROTECTION SYSTEM DESIGN FOR NUCLEAR FACILITIES IN INDONESIA

Ign. Djoko Irianto
Center For Safeguards Technology – Batan
Kawasan Puspiptek Gedung 90 Lantai 3, Serpong – 15310
ABSTRACT
MODEL OF THE PHYSICAL PROTECTION SYSTEM DESIGN FOR NUCLEAR FACILITIES IN INDONESIA. The design of physical protection system (PPS) for nuclear facilities must be arranged in accordance national and international regulations. The international regulation is outlined on INFCIRC/225 Rev.4 while the national regulations are issued by National Nuclear Energy Agency (BATAN) and Nuclear Energy Control Board (BAPETEN). The design of physical protection system consists of several steps: determine the PPS objectives, make a preliminary design of PPS, analyze the PPS design and probably redesign the PPS. In determining the PPS objectives, first collect information on the condition of the nuclear facilities, including all features of the facilities, operating procedures and elements of physical protection systems. Then, conduct a detailed study of a range of adversaries that the PPS may encounter. Finally design PPS by arranging the best combination of the PPS elements: fences, barriers, sensors and monitor equipment, entry control equipment, communication equipment, procedures and security forces.

Keywords : Physical Protection, Nuclear Materials, Nuclear Facilities,
Published : Proceeding "Seminar Teknologi Pengamanan Bahan Nuklir Ke:1", Jakarta, 21 Nopember 2000.